\r\n\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n\r\n\r\n\r\n

Installing solar power and common mistakes

  1. 08-01-2022 10:23:20
  2. 122
When installing solar power as a system: stand-alone, grid-tied, hybrid hybrid system, micro grid system, we need to follow the following sequence:
Mục lục
Legal: Own the land and roof of the building, the type of equipment and the capacity of the equipment in accordance with the grid of the area you want to install.

Survey the area where you install solar power: including line and substation survey, shade survey, coordinates, topographic survey, ground survey, roof survey

The order of construction and installation of solar power

  • Simulation design: detailed 3D design of the solar power system.
  • Select the device you want to install in the system.
  • Make a construction plan.
  • Install equipment and wiring DC, AC, Ground for the system.
  • System connection: DC, AC, Earth, protective device.
  • Check and power on.
  • Carrying out procedures for installing two-way meters and signing power purchase and sale contracts.

Within the scope of the article, to the best of our knowledge, Intech Energy xin analyzes some common errors as follows:

 


Install the battery incorrectly


This position should install the side clamp pad instead of the middle clamp pad as shown in the picture

If you drill directly into the battery like this, no distributor will give you a warranty


Why have 3 but only 1 . installed?


Do not fix the edge pad firmly


Play on the battery


Sit on the solar panel


Use an iron bowl and shoot it on the battery frame




Outdoor electrical cabinet without cover
 
Tags news Installing solar power and common mistakes installing solar power and common mistakes

News other

Giỏ hàng

Tạm tính: 0 đ

Ưu đãi, giảm giá: 0 đ

Thành tiền: 0 đ

Tiến hành đặt hàng Đóng giỏ hàng

Hỗ trợ 24/7 Hotline: (+84)66 806 795