\r\n\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n\r\n\r\n\r\n

How to install a solar water heater

  1. 03-01-2022 10:26:23
  2. 52
Solar water heater is no stranger to us, this is a device that helps to heat water with sunlight. The natural way of heating water brings many benefits to people in terms of safety and optimal cost savings.
Mục lục

Solar water heater is no stranger to us, this is a device that helps to heat water with sunlight. The natural way of heating water brings many benefits to people in terms of safety and optimal cost savings.

The solar water heater system can heat water all day in the sun, and keep it hot for up to 72 hours afterwards. This is an automatic heating device without human intervention. Therefore, solar water heaters are widely used and widely used, especially necessary in mountainous areas when the grid power system is still difficult.

The structure of the energy water heater is quite simple, only consisting of a bracket, a heat-absorbing tube and an insulation tank. However, for the machine to work stably and best, it is necessary to know how to install a solar water heater in the right process and technique. Here is a share on how to install the most standard solar water heater.
 

Choose the right solar water heater installation location

The first step is to choose a suitable installation location, so that the water heater can absorb maximum heat as well as flow pressure to easily use hot water. A few notes to choose a solar water heater installation location:

- It is necessary to install the device in a well-ventilated, unobstructed location to maximize the absorption of heat from sunlight.

- The machine should be positioned as high as possible such as the roof, terrace to create enough flow pressure to all locations in the house to use water.

- Place the machine in a place that can withstand the force, firmly, firmly, to withstand the large weight of the machine for a long time  without affecting the structure and their life.

- The machine should be placed in the South direction to maximize the sunlight, increase the high heat absorption efficiency to quickly heat the water.

- Put lower water tank for power machine to create water pressure.

Solar water heater installation sequence


Below is a standard solar water heater installation sequence to ensure safety and efficiency for every family.
 

1 - Install the legs of the solar machine


Step 1: Assemble the stand bar with the bottle holder.

Step 2: Install the side cross bar and then proceed to install the right and left horizontal bars, behind

Step 3: Install the two diagonal bars in the south direction. Install the pipe support.

Step 4: Install two pipe support braces (2 small bars).
 

2 - Install the insulation tank


Step 1: Direct the screw foot down, put it quickly into the waiting slot of the bottle holder, adjust the BBO to balance before screwing it in place.

Step 2: Install the two tubes of the two ends of the thermos flask, align the weighing tube with the tank, then tighten the 4 screws in the insulation tank.

Step 3: Close the bottom cover of the BBO.

Step 4: Use the electric support seal clamp pliers, then rotate clockwise and press up so that the gasket is not channeled.

3 - Install the vacuum tube


Step 1: Apply oil to the hole to make it smooth.

Step 2: Install the rubber gasket on the tube, install the tube support bowl to the pipe holder, During the installation process, it should be noted: install 2 pipes on both sides first to fix.

Step 3: Align the fixed insulation tank.

Step 4: Completely install each tube into the insulation tank.
 

4 - Convenient dual mounting


Wrap the tape in the opposite direction of the thread, put it straight in the center, then install the elbow into the insulation tank and then heat it.
 

5 - Install the outlet, inlet and exhaust ducts


Step 1: Wrap the melt tape against the thread, weld the heat pipe with elbows and sleeves.

Step 2: place the air outlet 10 - 20 cm higher than the water supply tank.
 

6 - Code board screw drilling with background


Positioning, drilling holes, closing hatches, bolting screws, drilling the code board screws with the background.

Testing and commissioning of solar water heater

After the installation process, we will re-check the water inlet and outlet connections to ensure there is no water leakage during use. Solar water heater works best when the light is strongest, now we can check the temperature of the water to see if it is guaranteed.

In addition, it is necessary to use clean water to supply the solar water heater system to ensure clean water hygiene, and increase the life of the machine.
 

Ending


Above is how to install a standard solar water heater that you can refer to. Hopefully, it will help you to have certain product knowledge so that you can safely and effectively install a solar water heater. Solar water heaters bring great benefits to users, helping to save costs and protect the living environment.


 

News other

Giỏ hàng

Tạm tính: 0 đ

Ưu đãi, giảm giá: 0 đ

Thành tiền: 0 đ

Tiến hành đặt hàng Đóng giỏ hàng

Hỗ trợ 24/7 Hotline: (+84)66 806 795