CANADIAN SOLAR BATTERY 450W
-
0/5 - 0 Voted
Tấm pin Mono 450W HiKu thương hiệu Canadian Solar là dòng pin đơn tinh thể được sản xuất theo công nghệ làm mát Ku Modules, dựa trên nền tảng công nghệ Low Internal Current (LIC) Modules. Tấm pin được trang bị những công nghệ tối tân nhất hiện nay như: Half-cut cells, PERC, Multi Busbars, Chia đôi tấm pin. Công suất tấm pin Canadian Solar lớn hơn 26% so với tấm pin thông thường, giảm chi phí sản xuất điện LCOE đến 4,5%, giảm giá thành hệ thống lên đến
| Type: Mono (monobody) | Số lượng cell: 144 cells |
| TBrand: China | Cân nặng: 24.9 kg |
| Solar efficiency: 20.37% | Kích thước: 2108*1048*40 mm |
| STANDARD CONDITIONS SPECIFICATIONS | |
| CS3W | 450MS |
| Maximum power (Pmax) | 450 W |
| Voltage at peak power point (Vmp) | 40.5 V |
| Dòng điện tại công suất đỉnh (Imp) | 11.12 A |
| Open circuit voltage (Voc) | 48.7 V |
| Short circuit current (Isc) | 11.65 A |
| Modular photovoltaic efficiency | 20.37% |
| Operating temperature threshold | -40°C~+85°C |
| Maximum voltage threshold | 1000 V (IEC/UL) or 1500 V (IEC/UL) |
| Fire resistance standards | Class 1 (UL 1703) or Class C (IEC 61730) |
| Fuse peak current | 20 A |
| Classify | Grade A |
| Capacity tolerance | 0 ~ +5 W |
| SPECIFICATIONS NORMAL CONDITIONS | |
| CS3W | 450MS |
| Maximum power (Pmax) | 335 W |
| Voltage at peak power point (Vmp) | 37.7 V |
| Current at peak power (Imp) | 8.89 A |
| Open circuit voltage (Voc) | 45.6 V |
| Short circuit current (Isc) | 9.40 A |
| *Under normal conditions, solar radiation is 800 W/m², atmospheric pressure is 1.5 AM, ambient temperature is 20°C, wind speed is 1m/s | |
| MECHANICAL SPECIFICATIONS | |
| Photovoltaic cell type | Mono-crystalline |
| Number of cells | 144 [2 X (12 X 6) ] |
| Size | 2108 X 1048 X 40 mm (83.0 X 41.3 X 1.57 in) |
| Weight | 24.9 kg (54.9 lbs) |
| Front glass | Kính cường lực 3.2 mm |
| Frame material | Anodized aluminum, reinforced with crossbars |
| Junction box | IP68, 3 bypass diodes |
| Elactric cable | 4 mm2 (IEC), 12 AWG (UL) |
| Wire length (including connections) | Vertical : 500 mm (19.7 in) (+) / 350mm (13.8 in) (-); Horizontal: 1400mm |
| Connector Jack | (55.1 in); |
| Packing | 27 sheets/pallet |
| Number of plates in the container | 594 sheets |
| TEMPERATURE SPECIFICATIONS | |
| Power loss factor | -0.35 % / °C |
| Voltage drop factor | -0.27 % / °C |
| Current attenuation factor | 0.048 % / °C |
| Operating temperature of cel | 42 +/- 2 °C |
| QUALITY STANDARDS | |
|
Certificate
| IEC 61215, IEC61730, UL1703 |
INTECH ENERGY IS A PARTNER OF LONGi SOLAR IN VIETNAM
INTECH ENERGY is the official partner of LONGi SOLAR in Vietnam with more than 380 experienced employees who are always ready to support 24/7 before and after sales. We are a Vietnamese enterprise committed to ensuring the quality of all products distributed nationwide and providing smart solutions to help customers save time and costs.
More reasons You can rest assured to put your trust in us:
SALIENT FEATURES
Convergence of cutting-edge technologies
This panel is equipped with the most advanced technologies in the field today. Here are four technologies that have made this product line famous:
- Half-cut cells: With this technology, the battery cells are cut in half, so the number of independent battery cells will be doubled, from 72 to 144 battery cells on the same panel size. Thereby reducing the current to help the panel stay cooler when operating, thereby increasing the efficiency of photovoltaic conversion. In addition, these factors also help the panel have a longer life than usual.
- PERC: PERC technology stands for Passivated Emitter and Rear Cell. PERC helps improve the efficiency of the solar panel by allowing electrons to move more easily while increasing the reflectivity of light at the back of the solar cell, which converts a larger amount of light energy than conventional.
- Multi Busbars: The busbar acts as the main path leading electrons from the battery cell to the external circuit to form an electric current. With a battery cell with many busbars, electrons are more easily concentrated to form an electric current. So the panel uses a lot of thin metal wire to conduct the current, which will be stable and less consumed.
- Split panel: This technology splits the panel into 2 independent parts. Instead of the traditional type, if a part of this panel is shaded, the whole panel will be affected. Now, the level of influence will be halved, because the panel has been cut into 2 parts to operate independently.
This is the leading important indicator for a solar panel. Different from the performance tested under ideal conditions, the performance tested under NOTC conditions (test and evaluate based on actual weather conditions) will most accurately reflect the performance that the panel delivers. . The results show that the number achieved is up to 93.13% on this panel, the highest in the world and far ahead of the remaining competitors. With this high index, the solar panel's photovoltaic conversion efficiency will hardly be degraded in erratic weather conditions in Vietnam, both in strong sunlight and in weak sunlight.
CANADIAN SOLAR – TOP 3 GLOBAL LEADING BATTERY SHEET MANUFACTURERS
Canadian Solar is the world's leading designer and manufacturer of solar panels, with 18 years of experience and 13,000employees globally. Canadian Solar has implemented many large-scale projects with a capacity of up to 38 GW all over the world
12 years product warranty
We are committed to the quality of materials and craftsmanship in the manufacture of panels to maintain outstanding quality for 12 years.
25 years linear performance depreciation warranty
We guarantee your Canadian solar panels will reach their expected performance for 25 years. Specifically as follows: in the first year, ensure that the product capacity is not less than 98% of the capacity recorded on the panel. From year 2 to year 25, ensure that the capacity reduction per year is not more than 0.55%, and in year 25, the output power should not be less than 84.8% of the capacity stated on the panel label.
Have PICC insurance
The insurance program covers the official terms of Canada Solar, Inc.'s warranty, covering technical failures of PV modules that affect output and panel performance.
During the warranty period, if the panel has a technical defect from the manufacturer, immediately PICC Insurance will stand to pay the entire
Product Reviews
- Share product reviews Write your review
-
Average rating 0.0/5.0
(0 reviews) -
- 5 0
- 4 0
- 3 0
- 2 0
- 1 0
